Isothermal Community College

Continuing Education

Locations

Caldwell Community College and Technical Institute
(PTDI Certified – April 2007) 

Location/Registration & Training:

Transportation and Public Service (TAPS) Center
3030 Hickory Boulevard
Hudson, NC 28638 

Directions:

From I-40 take exit 123-B (Hwy 321 N). After you cross the Catawba River Bridge go through 6 lights. The center is on the right beside Rite Aid Pharmacy, . mile before the main campus of CCC&TI. It is 12 miles north of Hickory, 70 miles NW of Charlotte and 77 miles east of Asheville and directly across the road from the Hudson DMV and the Highway Patrol station. 

Catawba Valley Community College
(PTDI Certified – August 2006)

Location/Registration & Training: 

Old General Electric Plant
1223 Fairgrove Church Road SE
Conover, NC 28613 

Directions:

From I-40 west take Exit #128 - turn right at top of ramp - turn right at 1st light after McDonalds. From I-40 east turn left at top of ramp - turn right at 1st light after McDonalds. Proceed down large driveway through wooded area. The classroom is located next to the guard house in a trailer. 

Gaston College
(PTDI Certified – May 2012)

Location/Registration:

Gaston College 201 Highway 321 South Dallas, NC 28034-1499 

Directions:

From I-85, take exit 17 (HWY 321). As you exit the ramp, take a left at the red light and travel north on Highway 321. You will pass two traffic lights and pass over a bridge. About 1/4 mile past the bridge- take the Gaston College exit ramp. At the top of the ramp, turn left and follow the road to the traffic circle. Take the first exit right off the circle to go to the main part of campus. Follow Truck Driver signs. 

Location/Training:

Old Carolina Freight Terminal
1201 East Church Street
Cherryville, NC 28021 

Directions:

Traveling Hwy 321 south take exit #24. Turn right to 2nd light. Turn left onto Hwy 150 west. Follow 150 west into Cherryville. The old Carolina Freight Terminal is on the right. 

From Hwy 321 north (exit 17 off I-85) go to the next exit pass Gaston College exit as mentioned above. This is the Dallas Cherryville Highway 279. Follow Hwy 279 west to the 1st light in Cherryville. Turn right, cross railroad tracks to light. Terminal is directly across the road in front of you. 

Mitchell Community College

Location/Registration & Training:

Continuing Education Center 701 West Front Street Statesville, NC 28677

Directions:

From the Historic Main Campus: When facing the College—turn to the left onto Mulberry Street. Go two blocks to the stoplight (Spur Station on the left). Turn right onto E. Front Street. Go down one block to the next light—go thru the light—Continuing Education Center is about 1/8th of a mile on the left. 

Isothermal Community College
(PTDI Certified)

Location/Registration & Training:

Rutherford Campus
286 ICC Loop Road
Spindale, NC 28160 

Directions:

From Morganton ICC is 36 miles SW. (I-40 exit 103, Hwy 64 to 74A east) 

From Asheville ICC is 61 miles SE. (I-26E exit 67 to 74A east) 

From Marion ICC is 28 miles south. (221S to 74A east) 

Location/Registration & Training:

Rutherford Campus
286 ICC Loop Road
Spindale, NC 28160